Skip to content

T301160 Fenner Drives B-Loc B103 - Metric - Steel - 160mm

$394.20
SKU T301160 Fenner Drives

Please Note: If the manufacturer is out of stock, a minimum order quantity may apply. If this applies to your order you will be contacted by our customer support team.

PRODUCT DESCRIPTION

Fenner Drives - Power Transmission - Keyless Locking Devices - B-Loc® B103 - Steel - Metric


Overview:
  • The B-LOC B103 Series 160mm Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 160mm in diameter by means of a mechanical interference fit and transmits up to a maximum of 38287 Nm of torque.
Description:
  • B-LOC B103 Series 160mm Keyless Bushing provides a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their shallow, single taper design with integrated push-off threads maintains exceptional concentricity and the ability to transmit bending loads. Since the B-LOC B103 Series Keyless Bushings do not have a flange, the external diameter along the unit's entire length is the same, therefore allowing the unit to be completely inserted into the component bore for flushed or recessed mounting. The B103 Series also has limited axial movement during installation and is RoHS compliant.


  • Best Suited For: Applications that require a recessed installation of the bushing, but can accommodate some axial movement of the mounted component relative to the shaft during tightening.


  • Shallow, single taper design with integrated push-off threads
  • Exceptional concentricity and ability to transmit bending loads
  • Limited axial movement during installation
  • Recessed installation without the need for a counterbore
  • RoHS compliant


  • Note: Flange of B103 Series Keyless Bushing should be located inside of hub bore.

    Features of Fenner Drives Keyless Bushings:
  • Ability to transmit higher torques
  • True zero-backlash
  • Less equipment downtime
  • Ability to mount over existing keyways
  • Complete axial and radial adjustability
  • Simple installation, adjustment and removal


  • All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
Dimensions:

SPECIFICATIONS

Series: B103 Torque Transmission: 38287 Nm
Axial Movement: Approximately 0.8 mm Bore Tolerance: 210.08
Compliancy: RoHS Component Bore Diameter: 210mm
Hub Pressure: 178 Installation Torque: 183Nm
Internal/ External: Internal Material: Steel
Metric/Inch: Metric Releasing/ Locking: Locking
Screw Size: M14 x 40 Self-Centering: Yes
Shaft Diameter: 160mm Shaft Tolerance: 159.92
Taper: Single Thrust: 478591

Part Number d D L L1 L2 Locking Screw Size Ma Mt
Max.
Transmitted
Th
Max.
Transmitted
Ph
(mm) (mm) (mm) (mm) (mm) Qty Size Install
Torque
(Nm)
Torque
(Nm)
Thrust
(N)
Hub
Pressure
(N/mm2)
T301015 15mm 32mm 14mm 21.5mm 18mm 4 M4 x 12 5 115 15390 91
T301018 18mm 47mm 17mm 28.5mm 22.5mm 5 M6 x 20 14 327 36371 121
T301019 19mm 47mm 17mm 28.5mm 22.5mm 5 M6 x 20 14 346 36371 121
T301020 20mm 47mm 17mm 28.5mm 22.5mm 5 M6 x 20 14 364 36371 121
T301022 22mm 47mm 17mm 28.5mm 22.5mm 5 M6 x 20 14 400 36371 121
T301024 24mm 50mm 17mm 28.5mm 22.5mm 6 M6 x 20 14 524 43645 136
B301025 25mm 50mm 17mm 28.5mm 22.5mm 6 M6 x 20 14 546 43645 136
T301028 28mm 55mm 17mm 28.5mm 22.5mm 6 M6 x 20 14 611 43645 124
B301030 30mm 55mm 17mm 28.5mm 22.5mm 6 M6 x 20 14 655 43645 136
T301032 32mm 60mm 17mm 28.5mm 22.5mm 8 M6 x 20 14 931 58193 151
B301035 35mm 60mm 17mm 28.5mm 22.5mm 8 M6 x 20 14 1018 58193 151
T301038 38mm 65mm 17mm 28.5mm 22.5mm 8 M6 x 20 14 1106 58193 140
B301040 40mm 65mm 17mm 28.5mm 22.5mm 8 M6 x 20 14 1164 58193 140
T301042 42mm 75mm 20mm 34.5mm 26.5mm 7 M8 x 25 34 1991 94822 168
B301045 45mm 75mm 20mm 34.5mm 26.5mm 7 M8 x 25 34 2133 94822 168
B301050 50mm 80mm 20mm 34.5mm 26.5mm 7 M8 x 25 34 2371 94822 157
T301055 55mm 85mm 20mm 34.5mm 26.5mm 8 M8 x 25 34 2980 108368 169
B301060 60mm 90mm 20mm 34.5mm 26.5mm 8 M8 x 25 34 3251 108368 160
T301065 65mm 95mm 20mm 34.5mm 26.5mm 9 M8 x 25 34 3962 121914 170
B301070 70mm 110mm 24mm 40.5mm 30.5mm 8 M10 x 30 68 6151 175750 177
T301075 75mm 115mm 24mm 40.5mm 30.5mm 8 M10 x 30 68 6591 175750 169
T301080 80mm 120mm 24mm 40.5mm 30.5mm 8 M10 x 30 68 7030 175750 162
B301085 85mm 125mm 24mm 40.5mm 30.5mm 9 M10 x 30 68 8403 197719 175
B301090 90mm 130mm 24mm 40.5mm 30.5mm 9 M10 x 30 68 8897 197719 168
T301095 95mm 135mm 24mm 40.5mm 30.5mm 10 M10 x 30 68 10435 219688 180
B301100 100mm 145mm 26mm 45mm 33mm 8 M12 x 35 122 13478 269557 190
T301110 110mm 155mm 26mm 45mm 33mm 8 M12 x 35 122 14826 269557 177
B301120 120mm 165mm 26mm 45mm 33mm 9 M12 x 35 122 18195 303251 188
T301130 130mm 180mm 34mm 55mm 41mm 9 M14 x 40 183 25452 391574 170
T301140 140mm 190mm 34mm 55mm 41mm 9 M14 x 40 183 27410 391574 161
T301150 150mm 200mm 34mm 55mm 41mm 10 M14 x 40 183 32631 435082 170
T301160 160mm 210mm 34mm 55mm 41mm 11 M14 x 40 183 38287 478591 178
T301170 170mm 225mm 44mm 65mm 51mm 12 M14 x 40 183 44378 522099 140
T301180 180mm 235mm 44mm 65mm 51mm 12 M14 x 40 183 46989 522099 140
T301190 190mm 250mm 44mm 65mm 51mm 15 M14 x 40 183 61999 652624 157
T301200 200mm 260mm 44mm 65mm 51mm 15 M14 x 40 183 65262 652624 157
T301220 220mm 285mm 50mm 73mm 57mm 12 M16 x 45 297 82145 746770 139
T301240 240mm 305mm 50mm 73mm 57mm 15 M16 x 45 297 112016 933463 162
T301260 260mm 325mm 50mm 73mm 57mm 18 M16 x 45 297 145620 1120155 183
T301280 280mm 355mm 60mm 85mm 67mm 16 M18 x 50 393 163726 1169473 146
T301300 300mm 375mm 60mm 85mm 67mm 18 M18 x 50 393 197349 1315657 155
T301320 320mm 405mm 74mm 102mm 82mm 18 M20 x 50 569 274346 1714665 152
T301340 340mm 425mm 74mm 102mm 82mm 21 M20 x 50 569 340075 2000443 169
T301360 360mm 455mm 86mm 116mm 94mm 18 M22 x 60 759 377769 2098718 142
T301380 380mm 475mm 86mm 116mm 94mm 21 M22 x 60 759 465216 2448505 159
T301400 400mm 495mm 86mm 116mm 94mm 21 M22 x 60 759 489701 2448505 153

TOLERANCE (TL) Bore diameter machined to D -0/+TL TL = .05mm for bores up to 120mm .08mm for bores up to 305mm .10mm for bores over 305mm d = Shaft diameter machined to d +0/-TL