39003-2605 by Garlock | BLUE-GARD® | Style 3300 | 0.125in Thick | 60in x 60in

BENEFITS:
Excellent Sealability** Unique blend of aramid fibers, fillers and elastomeric binders provides improved torque retention and drastically lowered emissions levels Versatile:** Variety of elastomers excel in a wide range of services** See note below for DTL 24696 Cost Savings:** Cuts operational costs through reduced: -- Waste -- Maintenance efforts -- Stocked inventory -- Fluid loss -- Energy consumption
MEDIA:
3000 Water, aliphatic hydrocarbons, oils & gasoline ** WRC BS 6920 Approved ** Meets BS7531 Grade Y Specifications 32005, 3400 Water, saturated steam+, inert gases 3300 Water, saturated steam+, refrigerants, oils and fuels 3700 Water, saturated steam+ and mild chemicals

Typical Physical Properties

		3000	3200/34004	33004	37004
Color		Blue	Off-white/ Grey-black	Black	Light grey
Binder		Nitrile (NBR)	SBR	Neoprene (CR)	EPDM
Temperature1	Maximum Minimum Continuous Max.	+700°F (+370°C) -100°F (-75°C) +400°F (+205°C)	+700°F (+370°C) -100°F (-75°C) +400°F (+205°C)	+700°F (+370°C) -100°F (-75°C) +400°F (+205°C)	+700°F (+370°C) -100°F (-75°C) +400°F (+205°C)
Pressure1 Continuous Max.	psig (bar)	1,000 (70)	1,200 (83)	1,200 (83)	1,200 (83)
P x T, max. (psig x °F) (bar x °C)	1/32", 1/16" (0.8mm, 1.6mm) 1/8" (3.2mm)	350,000 (12,000) 250,000 (8,600)	350,000 (12,000) 250,000 (8,600)	350,000 (12,000) 250,000 (8,600)	350,000 (12,000) 250,000 (8,600)
Sealability (ASTM F37B)2 ASTM Fuel A Nitrogen	ml/hr ml/hr	0.2 0.6	0.3 0.7	0.2 1.0	0.3 0.7
Creep Relaxation (ASTM F38)	%	21	18	15	20
Compressibility Average (ASTM F36)	%	8	10	7-17	10
Recovery (ASTM F36)	%	50	50	>56	50
Tensile Strength across grain (ASTM F152)	psi (N/mm2)	2,150 (15)	2,250 (15)	2,250 (15)	1,800 (12)
Density	lbs/ft3 (g/cm3)	100 (1.60)	100 (1.60)	105 (1.68)	100 (1.60)
Gas Permeability (DIN 3535 Part 4)3	cc/min.	0.05	0.03	0.08	0.04

Order Code (Part Number)	Style	Thickness (in.)	Width (in.)	Length (in.)
39003-2438	BLUE-GARD®-3300	0.016"	60"	60"
39003-2440	BLUE-GARD®-3300	0.016"	60"	120"
39003-2801	BLUE-GARD®-3300	0.016"	60"	180"
39003-2480	BLUE-GARD®-3300	0.031"	60"	60"
39003-2482	BLUE-GARD®-3300	0.031"	60"	120"
39003-2802	BLUE-GARD®-3300	0.031"	60"	180"
39003-2501	BLUE-GARD®-3300	0.047"	60"	60"
39003-2503	BLUE-GARD®-3300	0.047"	60"	120"
39003-2803	BLUE-GARD®-3300	0.047"	60"	180"
39003-2521	BLUE-GARD®-3300	0.063"	60"	60"
39003-2523	BLUE-GARD®-3300	0.063"	60"	120"
39003-2804	BLUE-GARD®-3300	0.063"	60"	180"
39003-2563	BLUE-GARD®-3300	0.094"	60"	60"
39003-2565	BLUE-GARD®-3300	0.094"	60"	120"
39003-2806	BLUE-GARD®-3300	0.094"	60"	180"
39003-2605	BLUE-GARD®-3300	0.125"	60"	60"
39003-2607	BLUE-GARD®-3300	0.125"	60"	120"
39003-2808	BLUE-GARD®-3300	0.125"	60"	180"

This is a general guide and should not be the sole means of selecting or rejecting this material. ASTM test results in accordance with ASTM F-104; properties based on 1/16" (1.6mm) sheet thickness.
* Values do not constitute specification limits

NOTES:
¹ Based on ANSI RF flanges at our preferred torque. When approaching maximum pressure, continuous operating temperature, minimum temperature or 50% of maximum PxT, consult Garlock Engineering.
² ASTM F37B Sealability ASTM Fuel A (isooctane): Gasket load = 500 psi (3.5 N/mm2), Int. pressure = 9.8 psig (0.7 bar) Nitrogen: Gasket load = 3,000 psi (20.7 N/mm2), Int. pressure = 30 psig (2 bar)
³ DIN 3535 Part 4 Gas Permeability, cc/min. (1/16" thick) Nitrogen: Gasket load = 4,640 psi (32 N/mm2), Int. pressure = 580 psig (40 bar)
⁴Saturated steam service guidelines: - For optimal performance, use thinner gaskets when possible. - Minimum recommended assembly stress = 4,800 psi. - Preferred assembly stress = 6,000 psi to 10,000 psi. - Retorque the bolts/studs prior to pressurizing the assembly. - If the service is superheated steam, contact Applications Engineering ⁵Refer to Mill spec section under "Gasketing Terms" for order/inquiry requirements All styles are furnished with an anti-stick parting agent as standard.