Minet MS 45 SS (Stainless Steel) Pin


Minet Lacing Technology - MS® Fastener Pins - MS® 45 SS (Stainless Steel) Pin

Pins avaialble in 18", 24", 30", 36", 42", 48", 60", 72", and 120" Lengths

  • MS® is a metal fastener for heavy duty belts with self-tapping screws.
  • No need for pre-drilling the belt or placing a template, the screws drill smoothly through the belt (thickness from 0.138" to 0.709").
  • Can be installed over a wide range of minimum pulley diameters from 2.952" to 17.717".
  • Can be installed on belts which are mechanically rated up to 7137.684 in/lb.
  • MS® in stainless steel allows the joining of the food industry and belt with a magnet.
  • ***Screws and Pins sold Separately from Fastners.***
  • The installation of MS® fasteners require only a powered screwdriver (battery or pneumatic).
  • Economic (no investment for complex tooling).
  • Safer (it is so easy to install that safety is at a minimum, far less risk than a fastener installed with a hammer).
  • Quickly installed = shortened breakdown repair time.
  • No pre-drilling / no template.
Installation Method:

Fastner Series Pins Hinge Diameter
MS® 25 MS 25 BSN (Bare Steel Nylon) Pin Ø 0.157in
MS 25 SSN (Stainless Steel Nylon) Pin
MS® 35 MS 35 BSN (Bare Steel Nylon) Pin Ø 0.181in
MS 35 SSN (Stainless Steel Nylon) Pin
MS® 45 MS 45 BS (Bare Steel) Pin Ø 0.256in
MS 45 BSN (Bare Steel Nylon) Pin
MS 45 SS (Stainless Steel) Pin
MS 45 SSN (Stainless Steel Nylon) Pin
MS® 55 MS 55 BSN (Bare Steel Nylon) Pin Ø 0.315in
MS 55 SSN (Stainless Steel Nylon) Pin
MS® 65 MS 65 BSN (Bare Steel Nylon) Pin Ø 0.394in

More Information
Part Number MS 45 SS Pin
Application Conveyor Belt, Pins
Hinge Diameter 0.256"
Material Stainless Steel
Series MS Series, MS 45
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account